Art DMV Pro Specifications download pdf (Page 31)

- 27 -

Discrete 4:

This routing configures the DMV-PRO as four mono signal

processors. Each Input feeds its corresponding Output.

However, if any Input (except #1) does not have a jack

inserted, its input will be taken from the closest previous

input that has a plug inserted. For example, if the unit is in

Discrete 4 mode and ¼ inch plugs are only inserted into

Inputs #1 and #3, both Engines #1 and #2 will be fed from

Input #1’s signal and Engines #3 and #4 will be fed from

Input #3’s signal. Similarly, if just Input #1 has a plug

inserted, Engines #1, #2, #3, and #4 will all be fed from the signal at Input #1. This scheme allows for some

interesting processing options. For instance, if Engines #1 and #2 receive material only from Input #1 (just

one input jack inserted), and you are in Discrete 4 routing, you can create “unlinked” stereo effects such as

flangers and choruses with different sweep widths and rates in the left and right channels. You could even

create digital delays and reverbs with similarly unrelated, though “stereo-ized,” channels. Since Engines #3

and #4 are also being fed from the same Input (#1), you could use those engines for two more simultaneous

effects. Remember that each engine still feeds its corresponding output jack, regardless of where its input is

taken from.

Multi FX:

Multi FX routing uses the DMV-PRO’s processors to create a three-engine multi-effect chain. Since most

engines contain a separate effect, EQ, delay, and dynamics sensing section, the actual multi-effect lengths can

be quite long. This routing gives you tons of power to creatively shape your sound.

The Multi FX routing combines the signal from Inputs #1 and #2 and runs it in series through Engines #1 and

#2. The signal is then split and fed to both inputs of linked engines #3 and #4, which are running in true-stereo.

The signal from Engine #3 is sent to Output #1 and the signal from Engine #4 is sent to Output #2. Inputs and

Outputs #3 and #4 are not used. Processor (A) controls the two mono effects (Engines #1 and #2) and

Processor (B) controls the true-stereo effect group (Engines #3 and #4).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 60 61

No comments

Art DMV Pro Specifications Page 31