Art DIO Specifications download pdf (Page 3)

- 3 -

INSTALLATION

The DI/O may be used in a wide variety of applications and

environments. Self-contained in an all-steel enclosure, the DI/O is

designed for continuous professional use. Because the unit is compact

and lightweight, mounting location is not critical. However, for greater

reliability we recommend that you not place the DI/O on top of power

amps or other sources of heat. The tube circuitry needs about a minute

to “warm up” from a cold power up.

AC POWER HOOKUP

The DI/O has an external power supply designed to operate at 115

VAC @ 50 to 60 Hz. Units manufactured for use outside the United

States of America have been modified to comply with the required

electrical specifications. Only use the adapter that came with the

DI/O. If the adapter becomes lost or damaged; contact ART Customer

Service for replacement. If you need to purchase one locally, just make

sure that you specify 9 Volt AC output (not DC), at 800 ma.

AUDIO CONNECTIONS

Audio connections to and from the DI/O are unbalanced ¼” (Tip = Hot

(+), Sleeve = Ground). We recommend that you turn down the INPUT

GAIN control whenever changing connections to the inputs.

SAFETY PRECAUTIONS

Warning: To avoid the risk of shock or fire, do not expose this unit to

moisture. Refer all servicing to qualified personnel. Do not remove the

metal cover; there are no user-serviceable parts inside. You should

only use the power adapter that came with this unit or one obtained

from ART’s Customer Service Department.

1 2 3 4 5 6 7 8 ... 15 16

No comments

Art DIO Specifications Page 3