Art 311 User's Guide download pdf (Page 9)

3. Connect the Low output of Channel One to the power amplifier

powering the low frequency cabinets (left).

4. Connect the High output of Channel One to the power amplifier

powering the high frequency cabinets (left).

5. Repeat for the right side of the system (Channel Two).

6. Connect the Subwoofer output to the subwoofer amplifier.

7. Set the crossover frequency for both channels (they should be the

same if your PA cabinets are the same).

8. Set the crossover frequency for the Subwoofer output to that

recommended for the Subwoofer.

9. With the power amplifier volume controls turned all the way down,

turn on all equipment in the system.

10. With a program source running through the system, turn up the

power amplifier volume controls and slowly turn up the crossover

output controls while checking each individual output for sound and

performance.

- 9 -

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Art 311 User's Guide Page 9