Art TPS Specifications download pdf (Page 3)

INSTALLATION

The TPS may be used in a wide variety of applications and

environments. In a rack-mountable, all-steel enclosure, the units are

designed for continuous professional use. Mounting location is not

critical. However, for greater reliability we recommend that you not

place the units on top of power amps or other sources of heat. The

tube circuitry needs about a minute to “warm up” from a cold power up.

AC POWER HOOKUP

The TPS has an internal power supply designed to operate at 115 VAC

@ 50 to 60 Hz. Units manufactured for use outside the United States

of America have been modified to comply with the required electrical

specifications.

ANALOG AUDIO CONNECTIONS

Audio connections to and from the TPS are balanced XLR (Pin 2 = Hot

(+), Pin 3 = Cold (-), Pin 1 = Ground) and unbalanced ¼” (Tip = Hot

(+), Sleeve = Ground). We recommend that you switch off the +48V

Phantom Power whenever changing connections to the XLR input. The

front mounted jacks can act as both a balanced XLR connection, and

an unbalanced ¼” connection.

SAFETY PRECAUTIONS

Warning: To avoid the risk of shock or fire, do not expose this unit to

moisture. Refer all servicing to qualified personnel. Do not remove the

metal cover; there are no user-serviceable parts inside. When

applicable, only use the power adapter that came with this unit or one

obtained from ART’s Customer Service Department.

- 3 -

1 2 3 4 5 6 7 8 ... 12 13

No comments

Art TPS Specifications Page 3