Art Pro Tube MP User's Guide Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
CCOONNNNEECCTTIIOONNSS
It’s easy to interface theTUBE MP with other equipment. All con-
nections are made at the back of theTUBE MP. Standard XLR and
1/4" inputs and outputs make patching simple. Note: For best
audio quality, always use high-quality cables.
IInnppuuttss
The TUBE MP provides both an XLR and 1/4”input jack. Use the
balanced XLR input for use with a microphone. Audio input as
well as phantom power (if needed switchable on and off) is sup-
plied through this jack. Use the unbalanced l/4” input jack for
instrument applications.
XLR pin configuration: pin 1 = gnd pin 2 = Positive (hot), pin 3
= negative.
Do not Use both inputs at the same time.
OOuuttppuuttss
The XLR output of theTUBE MP is active balanced You may “se it
in an unbalanced configuration without harm to the output cir-
cuitry. Use the unbalanced 1/4” jack for sending your signal to
amps, processors or other unbalanced configurations. Also, both
outputs may be used at the same time.
PPoowweerr
Insert the supplied 9 Volt AC adapter’s plug into the input labeled
Pwr, 9VAC on theTUBE MP’s back panel.
The TUBE MP is powered by an external 9VAC adapter. Always
make sure the output plug is securely plugged into the rear of the
TUBE MP, and that the adapter is held firmly in an electrical out-
let. Never operate the TUBE MP or AC adapter in the rain or in
wet locations. lf the AC adapter’s cord is ever cut, discontinue use
and replace the adapter with a new one. Unplug the adapter
when the TUBE MP is not in use. Refer to the label on the adapter
or the specifications later in this manual for the appropriate oper-
ating voltages.
3322
IInnttrroodduuccttiioonn
Thank you for purchasing the TUBE MP-and congratulations: You now own
one of the most sophisticated pieces of audio signal-processing gear
Offering a superb level of sound quality, the TUBE MP's special tube and
integrated circuit design combined with a straightforward user interface
quickly and easily Rives you access to all of its features.
FFeeaattuurreess ::
70dB of Gain
12AX7 Tube
XLR Balanced Input
1/4”TS Instrument Input
Balanced XLR Output
1/4”TS 0utput
Switchable Phantom Power
Phase Reverse Switch
20dB Gain Switch
Input Gain Control
output Level Control
1OHz to 2OKHz Frequency Response
>lOOdB Dynamic Range
AU Steel Chassis
Designed & Manufactured in the USA
Fill in the following information for your reference:
Date of purchase:______________________________________
Purchased from:______________________________________
Serial number: 127-______________________________________
This is a great time to fill out the User Registration Card included with your
TUBE MP to become a completely informed A R T Artist. Returning the
card to us ensures you of becoming the first to know about new A R T
products as well as any further developments from A R T.
127-5004-101
Page view 1
1 2 3 4 5

Comments to this Manuals

No comments